Fluorescent Grow lights will make it effortless for you to grow indoors plants for hydroponic and/or aquaponic systems, and fortunately there are lots of different fluorescent lights for growing your plants. They are all are useful, but every kind of fluorescent light provides advantages and pitfalls. Read this article to learn how to choose the ideal fluorescent light for plants that you are growing!
The fluorescent light fixtures may be installed anywhere in your house, garage, or greenhouse to enhance present light, and they can function as the only source of light to your plants. These fluorescent light bulbs pass power through a ceramic or glass tube comprising a combination of gases. Note that fluorescent light is usually less intense than HID ( high-intensity discharge) lights and they can operate on routine 120-volt connection but they need specific fluorescent light ballasts and fixtures depending on their specific type.
Choices for the best fluorescent grow lights for plants were restricted for several decades. The conventional 2-bulb, 4 foot fluorescent grow lights were just about your only option. Due to the cheap nature of these fluorescent light fixtures and the enormous advancements in the fluorescent light bulbs in recent times, conventional fluorescent lights continue to be an superb option even today.
When using conventional fluorescent light fixtures, deciding on the proper bulbs is essential. For instance, vegetative growth, and clones, you need a great deal of light from the blue end of the spectrum. So you should pick bulbs which say "trendy" or "trendy white". Additionally, I try to have bulbs which state higher output. Recently I have used the Sylvania Cool White Plus and am very pleased with their functionality).
With the proper bulbs set up, your fluorescent grow lights provide enough intensity to be able to grow up healthy plants around 10/12 inches tall. Usually, a single fluorescent light fixture in this way is ideal for clones or seedlings. But you can use two (or even three) fixtures over your plants to boost the powerful light zone to about 24-inch of excellent light. That is exactly what you want to get done if your plants typically grow to 20 inches.
Because fluorescent lights set out very little qualtity of heat, the tops of these plants can be kept 1-4 inches away from the bulbs constantly. They can even touch the bulbs and there's not likely to be much harm (apart from merely obstructing the light, may be).
Installing high output fluorescent lights fixtures can be a smart choice and these fixtures are typically similar to those with HID bulbs. Also, they are not as costly, and warm and cool bulbs can be found which match in precisely the exact same fluorescent light ballasts. Pick based on which light is much more attractive to your attention.
However, once can also get the job done by regular/traditional fluorescent grow lights, and those fluorescent tubes would be the least expensive option to use for some of the best fluorescent grow lights. You can use standard cheap light fixtures or decide to be more innovative and use something like multitier growing carts.
Point to remember is that the fluorescent tubes will create light that is not as intense as the other options (such as HID), and that means you're more restricted in what you're able to grow. Fluorescent light bulbs work for great for supplementing natural light as opposed to replacing it.
Light from trendy tubes casts a bluish shade, while hot tubes usually emit a white (pinkish) light. Full spectrum fluorescent grow lights can nicely approximate the colour of pure daylight. Note that the full-spectrum bulbs are a little more costly but many people believe them to be worth the cost since the colour of this light does not distort the colour of the plants.
Plants with reduced light needs ought to be set beneath the 3 to 4 inches of tubing at the end of the fluorescent light fixture. The tubes for your fluorescent light bulbs must be replaced every one and a half year when they're being used around 16 hours every day. It is also important to get the proper fluorescent light covers and maintain them nicely.
When you've determined which sort of fluorescent grow lights you need, it is time to determine what kind of bulb needed to cover the space you've got.
The Thumb Rule
Firstly, ascertain how much area you want to illuminate. Generally, you need 20-40 watts/square foot.
Then you need to divide the bulb wattage by 20 and 40 (For example, 1000÷20=50), 1000÷40=25).
This solution provides you the range of light intensity. With a single 1000 watt system, one can light between 25 to 50 sq. ft. of landscape (interior), based on your plants along with the light requirements they have.
Fix your installation as you see your plants' growth patterns, and heighten or reduce the level of the fluorescent light as per the observations. This may be accomplished by altering the positioning of your fluorescent light fixture or your plants plants or so that they come closer together or goes further apart, but not at all by altering the fluorescent light bulbs themselves. Changing fluorescent light covers also may have some impact given they determine how much light is retained and focused on the plants.